-
- About WT Henley
- Products
- Cable Accessories
- Polymeric Insulators
- Low Voltage Fusegear
- Jointing Tools
- Jointing Accessories
- LV Underground Distribution
-
LV/MV Mechanical Connectors
- LV Service Straight
- LV Service Straight (Pre-Insulated)
- LV Service Branch
- LV Mains Service Branch
- LV Mains Straight
- LV Mains Branch
- LV Terminations (Lugs)
- LV Terminations (Connectors)
- Railway Approved Connectors
- LV/MV Mains Straight
- LV/MV Mains Branch
- LV/MV Terminations (Lugs)
- LV/MV Stop Ends
- LV/MV (North America)
- Neutral Earth (CNE)
ML1, 2 & 3 aluminium
The ML range of mechanical lugs has been designed as a practical alternative to crimping or sweating methods. Terminations can be jointed using simple hand tools. The bolted connection to the busbar can be accurately located before the conductor is finally secured. The mechanical lugs have been short circuit tested.
DatasheetML4/1, 4/2, 4/9 & 4/10 brass forgings
The ML4 range of mechanical connectors are designed for the termination of stranded/solid, circular/shaped conductor cores. The mechanical lugs are manufactured in copper alloy and suitable for jointing either copper or aluminium cored conductor.
ML4/12, 4/13 & 4/14 brass forgings
The ML4 range of mechanical connectors are designed for the termination of stranded/solid, circular conductor cores. Also used for the termination of earth screens of 11KV polymeric conductors. The mechanical lugs are manufactured in copper alloy and suitable for jointing either copper or aluminium cored conductor.
ML5 aluminium
Termination of solid cored conductors.
ML6 aluminium
Termination of solid cored conductors.
ML7 aluminium
The ML7 mechanical lugs are manufactured from an aluminium forging, thereby providing an integral moisture block. The lugs utilise the patented 'universal' range taking shear bolts.
ML7/SH aluminium
The ML7 mechanical lugs are manufactured from an aluminium forging, thereby providing an integral moisture block. The lugs utilise the proven shear head technology with direct contact onto the cable cores thereby removing the requirement for a pressure pad.
ML8 aluminium
The ML8 mechanical lugs are manufactured from an aluminium forging, thereby providing an integral moisture block. The lugs utilise the patented 'universal' range taking shear bolts.
ML10/SH termination
The Sicame ML10/SH mechanical lugs are manufactured from an aluminium bar thereby providing an integral moisture block.
NML aluminium
The NML range of mechanical lugs has been designed as a practical alternative to crimping or sweating methods. Terminations can be jointed using simple hand tools. The bolted connection to the busbar can be accurately located before the conductor is finally secured. The mechanical lugs have been short circuit tested.
